Carbon/Sulfur Analyzer

Standard Model: EMIA-Pro
Enables everyone to become a professional analyst

The EMIA-Pro Carbon/Sulfur Analyzer is based on HORIBA’s widely respected expertise in Non-Dispersive Infrared (NDIR) technology.   
It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.

Segment: Scientific
Manufacturing Company: HORIBA, Ltd.

Long MTBM (Mean Time Between Maintenance)

The unique newly-developed cleaning mechanism (patent pending) clears the dust in the furnace, allowing the operator to continue to use the EMIA-Expert/Pro without maintenance cleaning for up to 200 measurements*.
* It depends on sample and measurement condition 


Before measurement         After 200 measurements

High Throughput

EMIA Series can complete one measurement cycle, “measurement-display result-cleaning”, in 70 seconds (i.e. about 50 samples/hour)

Fast & Easy Maintenance

With the latest innovations the cleaning time for the EMIA Series instruments is typically half of that of our conventional models. The flat design around the crucible stand and simple design around the furnace also simplify user access for cleaning.


Flat design around the crucible stand     

Advanced Operation software

A critical focus was to ensure that the EMIA-Expert/Pro Series was “easy-to-use”. In particular, we focused on the layout, operating menus and functions.
We have included a self-diagnostic monitor checking capability to check the status of the connected device, an alarm function and we have expanded 3 navigators to facilitate daily operation.

* Analysis Navigator 

This function uses the recommended best measurement flow and operating condition based on our experience. 

* Troubleshooting Navigator 

Automatic diagnosis system and troubleshooting navigator. 

* Maintenance Navigator 

Periodic preventive maintenance work navigator by videos and photos. 


The customer can extend the system’s functionality at any time, even after installation, depending upon their needs. Upgrades include:
* Carrier gas purifier for ultra-low concentration carbon measurement
* Auto-sampler (20 positions)
* Halogen trap unit


Required sample amount1g ± 0.1g
Typical Meas. time70 seconds/cycle
CarbonMeas. Range (m/m)1.6 ppm - 6.0%
Blank accuracyσn-1 ≦ 0.8 ppm
SulfurMeas. Range (m/m)2.0 ppm - 1.0%
Blank accuracyσn-1 ≦ 1.0 ppm
Sample meas. AccuracyCarbonσn-1 ≦ 2.0 ppm
or RSD≦1.0%
Sulfurσn-1 ≦ 2.0 ppm
or RSD≦1.5%
UtilityCarrier gasOxygen
(Purity; 99.5%, Pressure; 0.30-0.33MPa)
Operation gasNitrogen
(Purity; 99.5%, Pressure; 0.35-0.38MPa)
Power200/220/240V, 50/60Hz, 5kVA
DimensionsMain unit*500(W) x 725(D) x 710(H) mm
MassMain unitapproximately 134 kg
Data processing and operationUSB data communication with PC Windows 8.1
Touch panel or Key board and mouse operation
Model nameEMIA-20P: Carbon/Sulfur
EMIA-21P: Carbon
EMIA-22P: Sulfur

Note) "ppm" is equal to mg/kg.

*Except piping parts, projection parts (D:79mm) and flow meter on the back side.



Crucible Pre-heating Unit

The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.


Automation crucible loading and disposing unit. Up to 20 pcs of crucible are available to be set.


Ceramic crucible

Low carbon blank and high dimension tolerance for high precision analysis.


High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)

Analytical Chemistry in Nonmetallic Minerals
Analytical Chemistry in Nonmetallic Minerals
This application note describes the method and conditions to use with the EMIA 820V C/S analyzer to measure cement.
Ferrous Metals Characterization in Primary Metals
Ferrous Metals Characterization in Primary Metals
Battery Evaluation in Electrical Equipment
Battery Evaluation in Electrical Equipment
Analytical Chemistry in Plastics and Rubber
Analytical Chemistry in Plastics and Rubber

Request for Information

Do you have any questions or requests? Use this form to contact our specialists. * These fields are mandatory.

Related products

Auto SE
More Auto SE

Spectroscopic Ellipsometer for Simple Thin Film Measurement

More EMGA-920

Oxygen/Nitrogen Analyzer

More EMGA-921

Hydrogen Analyzer

More EMGA-930

Oxygen/Nitrogen/Hydrogen Analyzer

More EMIA-Expert

Carbon/Sulfur Analyzer

More EMIA-Step

Carbon/Sulfur Analyzer

GD-Profiler 2™
More GD-Profiler 2™

Discover a Whole New World of Information with Glow Discharge Optical Emission Spectrometer

LabRAM HR Evolution
More LabRAM HR Evolution

Confocal Raman Microscope

More MESA-50

X-Ray Fluorescence Analyzer

More MESA-50K

X-Ray Fluorescence Analyzer

More SLFA-60

X-ray Fluorescence Sulfur-in-Oil Analyzer

More SLFA-6000

X-ray Fluorescence Sulfur-in-Oil Analyzer

Smart SE
More Smart SE

Powerful and Cost Effective Spectroscopic Ellipsometer

Ultima Expert LT
More Ultima Expert LT

Affordable high performance ICP-OES

More UVISEL Plus

Spectroscopic Ellipsometer from FUV to NIR: 190 to 2100 nm

More XGT-7200

X-ray Analytical Microscope

More XGT-9000

X-ray Analytical Microscope

More XploRA™ PLUS

Raman Spectrometer - Confocal Raman Microscope


Total Nitrogen and Sulfur Analyzer


Total Halogen and Sulfur Analyzer

More EMIA-Expert

Carbon/Sulfur Analyzer

Gratings - OEM Diffraction Grating
More Gratings - OEM Diffraction Grating

OEM gratings design and production capabilities

More EMGA-920

Oxygen/Nitrogen Analyzer

More EMGA-921

Hydrogen Analyzer

More EMGA-930

Oxygen/Nitrogen/Hydrogen Analyzer

More EMIA-Expert

Carbon/Sulfur Analyzer

More HP-480(W)

Industrial pH meter