Industrial pH meter - Pulse poportional control HP-480PL

Industrial pH meter HP-480PL

The HP-480PL industrial pH meter is a pH meter with a pulse proportional control function, which can drive a pulse pump directly.

As the HP-480PL has a high injection resolution per pulse, it can be used to control a pulse pump as part of a system for processing involving fine control of pH values, for example controlling the pH values of microscopic or small samples.

 

Segment: Process And Environment
Division: Process Water
Base product
Manufacturing Company: HORIBA Advanced Techno Co. Ltd.

 

  • Pulse proportional control function
    A pulse signal proportional to the set pH value is output.
    This signal can be input directly into a pulse pump, making it possible to construct a simple system with an excellent cost-performance ratio.
  • Maximum pulse output of 360 SPM
    A maximum of 360 pulses per minute can be output.
    It has a high insertion resolution per pulse, allowing for very fine control of pH values.
  • Compatible with five types of temperature compensation element
    Five types of temperature compensation element are supported: 500 Ω, 6.8 kΩ, 1 kΩ, 10 kΩ and 350 Ω.
  • Easy pH correction
    After immersing the pH electrodes in the standard fluid, simply follow the instructions displayed and press the ENT key.
    The automatic correction process is plain and simple.
  • A line-up of lead-free pH electrodes
    Uses lead-free glass. In addition, almost all sections of the pH electrodes, including lead wires and soldered junctions are lead-free.
  • Uses lead-free solder
    To reduce the burden on the environment, lead-free solder has been used to mount the components on the printed circuit board.

 

 

Product nameIndustrial pH meter
ModelHP-480PL
Measuring rangepH 0 to 14: resolution of 0.01 pH
Temperature 0 to 100: resolution of 1 °C (selectable)
Transmission output4 mA to 20 mA DC, input / output isolated type
Maximum load resistance 900 Ω
Transmission output range: freely selectable within the measurement range
RepeatabilityWithin ±0.05 pH of the full scale (by equivalent input)
LinearityWithin ±0.05 pH of the full scale (by equivalent input)
Contact outputOutput: 2 points
Alarm contact output (R1 and R2)
Contact type: relay contact, SPST-NO (1a)
Contact capacity: 240 VAC, 0.3 A and 100 VDC, 0.3 A (resistance load)
Contact function: selectable from upper / lower limit operation (ON / OFF control), alarm, and maintenance.
Control action· ON / OFF control
· Pulse proportional control
Calibration functionTwo-point automatic calibration or manual calibration
Temperature calibration (one point)
Transmission output hold function· Just before hold
· Optional value hold
· Continuous
Selectable from the above (However, only the just before hold is available in the maintenance mode.)
Self-diagnosis function· Calibration failure
· Electrode self-check
· Outside of the measuring range
· Transducer error
Temperature compensation elementSelectable from compensation ON (500 Ω (25 °C), 6.8 kΩ (25 °C), 350 Ω (25 °C), 1 kΩ (0 °C) or 10 kΩ (25 °C)) and compensation OFF
Power supplyRated voltage 100 to 240 VAC, 50 / 60 Hz, 10 VA (max.)
StructureIndoor-use panel installation type
Panel: IP65 drop-proof structure
Protective structurePanel: IP65 (IEC60529, JIS C0920)
Conforming standardsCE Marking
FCC Rule
External dimensions48 (W) x 96 (H) x 115 (D) mm
Case depth: approx. 105 mm
MassApprox. 400 g
Waste Water Treatment and Disposal in Water Waste Management and Remediation Services
Waste Water Treatment and Disposal in Water Waste Management and Remediation Services

REQUEST FOR INFORMATION

Do you have any questions or requests? Use this form to contact our specialists.

Product Accessories

More6155 Series/6855 Series
Industrial Gel-filled pH/ORP Electrode